Awekeys
HMX SILLYWORKS HYACINTH V2 LINEAR SWITCH FACTORY LUBED EDITION (10PCS)
HMX SILLYWORKS HYACINTH V2 LINEAR SWITCH FACTORY LUBED EDITION (10PCS)
Couldn't load pickup availability
The Hyacinth V1 switch was already a great success, but Sillyworks always strive to reach a higher limit. After almost two years since they released the Hyacinth V1, the V2 version is finally here. Compared to Hyacinth V1, the V2 version had a lot of upgrades and changes; Firstly, the manufacture of the V2 was changed from KTT to HMX. HMX is able to mold more precisely to create more consistent stem length and housing tolerance. If you have used other HMX switches such as the Macaron or Macchiato, you will understand what their molds are like: The stem and housing tolerance is super high as the stem sits super stable in the housing. There is super minimal stem wobble as the housing really closes up on the stem. However, you will never feel that the housing is squishing the stem too tight to create bottom-out issues. That is how precise HMX's molds are. The V2 switches are smooth, tight, and great-sounding.
1 quantity = 10 switches
Switch Type: Linear
Manufacturer: HMX
Stem material: POM
Top Housing: PC
Bottom Housing: Modified Nylon
Operating Force: 45g
Bottom-out Force: 52g
Spring: 22mm single-stage spring
Pre-travel: 1.9mm
Total Travel: 3.5mm
Check out this wonderful review video by KeebTaro
Description
The Hyacinth V1 switch was already a great success, but Sillyworks always strive to reach a higher limit. After almost two years since they released the Hyacinth V1, the V2 version is finally here. Compared to Hyacinth V1, the V2 version had a lot of upgrades and changes; Firstly, the manufacture of the V2 was changed from KTT to HMX. HMX is able to mold more precisely to create more consistent stem length and housing tolerance. If you have used other HMX switches such as the Macaron or Macchiato, you will understand what their molds are like: The stem and housing tolerance is super high as the stem sits super stable in the housing. There is super minimal stem wobble as the housing really closes up on the stem. However, you will never feel that the housing is squishing the stem too tight to create bottom-out issues. That is how precise HMX's molds are. The V2 switches are smooth, tight, and great-sounding.
1 quantity = 10 switches
Switch Type: Linear
Manufacturer: HMX
Stem material: POM
Top Housing: PC
Bottom Housing: Modified Nylon
Operating Force: 45g
Bottom-out Force: 52g
Spring: 22mm single-stage spring
Pre-travel: 1.9mm
Total Travel: 3.5mm
Check out this wonderful review video by KeebTaro